本科论文摘 要钢渣是钢材处理后残余的物质，发生化学反应后形成的一种氧化物。目前越来越多国家发现钢渣在节约能源方面具有长远发展，通过不同手段将钢渣处理过后，得到的渣粉可以掺进水泥、混凝土混合使用，节省水泥、混凝土等资源，节省原料和成本，而且强度大大超过之前，减少环境污染，实现节能环保的效果。在钢渣处理过程中，涉及到粉尘外泄，容易产生粉尘伤害。针对这一危险，就要掌握一种评价方法，制定措施。因此对该项目要做好安全管理工作，并进行安全风险识别与安全评价研究。本篇文章首先对钢渣处理的背景展开研究，然后又对目前世界各国对钢渣的研究现状进行分析，然后对评价方法介绍，分析危险有害因素，进行危险源辨识，运用定性定量的方法，提出预防措施，提供相应依据。关键词：安全风险识别；安全评价；事故树评价法；危险源本科论文AbstractSteel slag is the residual material after steel processing, an oxide formed after chemical reaction. At present, more and more countries find that steel slag has long-term development in energy saving. After processing the steel slag by different means, the resulting slag powder can be mixed into cement and concrete to save resources such as cement and concrete, save raw materials and costs, and The intensity is much higher than before, reducing environmental pollution and achieving the effect of energy saving and environmental protection. In the process of steel slag treatment, dust leakage is involved, and dust damage accidents are likely to occur. In response to this danger, we must master an evaluation method and formulate measures. Therefore, the project should do a good job in safety management, and conduct safety risk identification and safety evaluation research.This article first studies the background of steel slag treatment, and then analyzes the current status of research on steel slag in countries around the world, then introduces evaluation methods, analyzes hazardous factors, identifies ...
