飞行汽车变形机构设计、建模及仿真摘要 随着道路上的车辆越来越多，现在越来越容易出现交通拥挤，于是出现了飞行汽车，但是现在的飞行汽车基本都不能在普通的道路上以普通汽车模式行驶的同时，在遇到堵车的情况下能及时地起飞避开拥堵路段。该研究的意义就在于实现飞行汽车在汽车模式下在道路上遇到拥堵时，可以及时完成变形同时起飞离开拥堵路段到达目的地。这样能很大程度的提高飞行汽车作为普通交通工具的可能。本次毕业设计就将利用 Solidworks 进行设计并建立三维模型，利用铰链，液压，连杆等机构实现飞行汽车的变形。关键词：飞行汽车、变形、机构AbstractWith more and more vehicles on the road, it is now more and more prone to traffic congestion, so flying cars appear, but nowadays flying cars are basically unable to drive in ordinary car mode on ordinary roads. In the case of traffic jams, it can take off in time to avoid congested roads. The significance of this study is to realize that when flying cars encounter congestion on the road in car mode, they can complete the deformation in time and take off and leave the congested road to reach their destination. This can greatly improve the possibility of flying cars as ordinary vehicles. This graduation project will use Solidworks to design and build a three-dimensional model, using hinges, hydraulic pressure, connecting rods and other mechanisms to achieve the deformation of flying cars.Keywords: flying car, deformation, mechanism目录第一章 绪论..................................................................................................................11.1 课题研究背景及意义......................................................................................11.2 国内外研究现状..............................................................................................21.2.1 国外研究现状.......................................................................................21.2.2 国内研究现状..............
