摘 要论述了 Mg-Al-Zn 系合金经过固溶处理后组织和耐腐蚀性能的变化。通过观察经固溶处理后的组织与塔菲尔曲线,对 Mg-Al-Zn 系合金固溶处理后的组织和电化学腐蚀行为进行了讨论。结果表明,经过固溶处理后的镁合金显微组织晶粒长大明显,β-(Mg17Al12)相部分溶解在基体组织中,在温度达到 560 度以上时,组织发生过烧现象。与未经处理镁合金的耐腐蚀性能相比,经过固溶处理后的镁合金耐腐蚀性能无明显增加。关键词:镁合金;固溶处理;显微组织;耐腐蚀性能Title:Solution Treatment on Mg-Al-Zn alloys organizations and the impact of corrosion resistanceAbstractDiscusses the Mg-Al-Zn alloy after solution treatment and corrosion resistance after the organization changes. By observing the organization after solution treatment and the Tafel curves of Mg-Al-Zn alloy after solution treatment and electrochemical corrosion behavior was studied. The results showed that, after the magnesium alloy after solution treatment microstructure grain growth significantly, β-(Mg17Al12) phase partially dissolved in the matrix organization, in the temperature reaches 560 degrees, the tissue over-burning phenomenon. With untreated corrosion resistance of magnesium alloys compared to that after the magnesium alloy after solution treatment did not increase the corrosion resistance.Keywords : Magnesium alloy ; Microstructure ; Corrosion resistance学位论文原创性声明本人重声明:所呈交的论文是本人在导师的指导下独立进行讨论所取得的讨论成果。除了文中特别加以标注引用的容外,本论文不包含任何其他个人或集体已经发表或撰写的成果作品。对本文的讨论做出重要贡献的个人和集体,均已在文中以明确方式标明。本人完全意识到本声明的法律后果由本人承担。作者签名: 日期: 年 月 日学位论文使用授权书本学位论文作者完全了解学校有关保留、使用学位论文的规定,同意学校保留并向国家有关部门或机构送交论文的复印件和电子版,允许论文被查阅和借阅。本人授权大学可以将本学位论文的全部或部分容编入有关数据库进行检索,可以采纳影印、缩印或扫描等复制...