北京理工大学珠海学院 2020 届本科生毕业设计深圳市医疗固体废物废气处理工程设计深圳市医疗固体废物废气处理工程设计摘要在现代社会中，尤其时近二十年，社会在飞速发展，但从而所产生的各方面问题就逐渐变多，例如医疗固体废物量的逐年上涨，由于近年各种流行病的突然爆发，医疗技术发展的同时，人民看病的需求越来越大，导致其对于医疗固体废物进行处理刻不容缓。本设计的灵感来源来自对于深圳市医疗固体废物调查，发现近年流行疾病增多，医疗固体废物的数量急剧上升，本设计目的是将收集后的医疗固体废物通过焚烧处理产生的废气进行对其污染物的净化，本项目将设计对于深圳市龙岗区医疗固体废物通过焚烧所产生的气体进行进化处理。其通过“热解焚烧，除酸喷雾塔+石灰石—石膏湿法脱硫工艺+串联式旋风除尘器+SCR 烟气脱硝工艺+袋式除尘器”的组合工艺来进行对医疗固体废物的净化处理。以实现环保、节能等目标。经过本设计废气处理系统净化后，各项大气污染物排放需满足《危险废物焚烧污染控制标准》（GB 18484-2001）中的要求。关键词：医疗固体废物；烟气净化；垃圾焚烧；环境保护北京理工大学珠海学院 2020 届本科生毕业设计Shenzhen medical solid waste waste gas treatment project designAbstractIn modern society, especially in nearly 20 years, the rapid social development, but the various aspects the problems will gradually become more, such as the amount of medical solid wastes are increasing, due to various sudden outbreak of epidemic in recent years, the development of medical technology, the increasing need of people to see a doctor, cause for medical solid waste handling is urgently needed.This design inspiration comes from the shenzhen medical solid waste survey, found that epidemic disease increased in recent years, the sharp rise in the number of medical solid waste, the purpose of this design is to collect after created through medical solid waste incineration flue gas to the purification of pollutants, the project will design in shenzhen longgang district medical solid waste produced by burning ...
VIP
